Steel processing machinery in outdoor work should be added a hangar, beside the machine should be piled up the venue for raw materials, semi-finished products processing, long steel there should be a specialist support and listen to the operator command, shall not be any push-pull homework should be stacking the finished product, cleaning up, cut off the power and lock the switch box, to do a good job of lubrication.

Steel bar bending machine when using the matters needing attention

Countertops and bending machine surface should be kept level, before operation should be ready to all kinds of spindle and tool should be in accordance with the requirements of processing steel bar diameter and bending radius turn good corresponding specifications of the spindle and forming shaft, shaft, gear shaft should be iron collar. Block iron shaft diameter and strength shall not be less than the diameter of the bending and strength, and shall not be allowed in straight steel bar bending machine bending. Should check and confirm the core shaft block iron shaft rotary table no cracks and damage, such as shield, strong light after normal operation before operation.

Wheel rotation process, it is forbidden to replace core shaft, pin, commutation Angle and speed, also may not be cleaned and fuel. For more than machinery nameplate of the diameter of the steel bar is strictly prohibited to bend, the bending without cold drawn or reinforced with scale, goggles should be worn.

Bending of high strength steel, should be in accordance with relevant provisions of the machinery nameplate corresponding spindle diameter and should be allowed a transfer. The placement of steel semi-finished products should be neatly stacked, hook shall not up, when the wheel steering, after should be stopped.

Reinforced steel bar bending machine, after finish the homework should be cleared of turntable and insertion hole of the downtime rust, debris, etc.